To operate industrial chiller equipment, it is not only necessary to directly press the button switch, but there are actually some steps that need to be understood clearly. In the actual operation and operation process, because the industrial chiller has more components and equipment, these must be strictly inspected and tested before they can be operated. After a series of inspections and tests, they can be operated under the conditions of starting up in Manzhouli. Industrial chillers can maintain the stable operation of equipment. Of course, in the process of operation, we must avoid improper operation problems that affect various equipment failures.

Huarui Refrigeration Equipment summarizes the following correct operation steps and precautions for safe startup of industrial chillers:

Step 1: In the beginning, it is necessary to make sure that the status of each valve and other parts of the industrial chiller fully meets the startup requirements. Only when the valve and other parts and equipment are turned on normally, can the industrial chiller be able to operate safely and operate at a higher efficiency.

Step 2: Make sure that all power supplies are in normal state before starting up. The operation of industrial chillers requires electrical energy, and the normal electrical energy must be ensured before the equipment can be turned on for operation.

Step 3: The chiller cools the basic equipment such as the water pump and the fan. Ensure that these basic equipment can operate normally to avoid failure and cause adverse effects.

Step 4: Check carefully whether the temperature of the lubricating oil in the chiller is equal to or higher than 30 degrees. If the temperature does not reach 30 degrees, you need to turn on the point heater and start the oil pump at the same time to quickly increase the temperature of the lubricating oil.